Catalytic degradation of toxic organic dye using an aluminum-doped Cu0.4Zn0.6-xAlxFe2O4 (x = 0.0, 0.2, 0.4, 0.6) spinel ferrite in a photo-Fenton system

Catalytic activity of spinel ferrite in breaking down toxic dye materials are promising due to their uniqueness. In this study, aluminum-doped copper zinc ferrite, Cu_0.4Zn_0.6-xAl_xFe₂O₄ (x = 0.0, 0.2, 0.4, 0.6), a catalyst for toxic dye degradation is synthesized through chemical co-precipitation route. The formation of the spinel ferrite catalyst is initially confirmed by Fourier transform infrared spectra, which shows the frequency of metal-oxygen bond vibration at 539 and 427 cm⁻¹ attributed to the tetrahedral and octahedral sites respectively. Higher intensity sharp peak of X-ray diffraction for (311) plane is the evidence for the phase purity and the formation of spinel ferrite. The crystallite size is found to decrease with the increase of Al³⁺ ion. The surface structure of the obtained particles is investigated using a scanning electron microscope. Analyses of the material's magnetic characteristics using a vibrating sample magnetometer (VSM) revealed that it is, in fact, a soft magnet, as evidenced by the loop of its hysteresis, which is narrow. The catalytic degradation of methylene blue dye under the mechanism of the photo-Fenton process is studied with the obtained spinel ferrites and the result is found to be as high as 96.5%. The process follows pseudo-second order kinetics and the Langmuir isotherm.     

废旧硬质聚氨酯泡沫塑料的木质素改性及再生

采用含有二乙二醇(DEG)和乙醇胺(ETA)的双组分解交联剂降解废旧硬质聚氨酯泡沫塑料(PU硬泡),并利用降解得到的低聚物多元醇与木质素复合制备出性能增强的再生PU硬泡。通过对制备的再生PU硬泡的红外光谱、密度、吸水率、抗压强度、热稳定性、导热系数、热重曲线等进行分析测试,考察m(DEG)∶m(ETA)对再生PU硬泡性能的影响。实验结果表明:m(DEG)∶m(ETA)=1∶3时废旧PU硬泡的降解效果最好;木质素加入量为2.0%(w)时再生PU硬泡的密度低、抗压强度高、保温性能良好,达到国家标准《建筑绝热用硬质聚氨酯泡沫塑料》(GB/T 21558—2008)的品质要求。     

Ozone facilitated degradation of caffeine using Ce-TiO2 catalyst

The ozone initiated oxidation of 1,3,7-trimethylxanthine (caffeine), commonly found in wastewaters as model compound is reported using cerium (Ce)/titanium dioxide (TiO₂) as catalyst. The effect of pH and loading of ceria on titania were investigated. Effect of reaction conditions on degradation of caffeine based on their pseudo first-order rate constants were compared. The combination of catalyst Ce-TiO₂ and ozone aeration significantly enhanced the degradation of caffeine compared to uncatalysed ozonation. The oxidation of caffeine ensued via the free radical mechanism, through enhanced ozone decomposition into OH radicals. Ce/TiO₂(0.5?wt%) showed good activity in degradation of caffeine at pH 6, in both natural stream and river water samples showing about 60% total organic carbon removal in 2?h ozonation period. Using liquid chromatography-mass spectroscopy, degradation products were analysed. A reaction intermediate and one final product were positively identified. Nano-catalysts with different loadings of Ce on TiO₂ synthesized by sol-gel route were characterized by scanning electron microscope, transmission electron microscopy, BET and powder X-ray diffraction spectrum techniques. The results showed that the material retained a highly ordered mesoporous structure and possessed large surface area.     

Higher-efficiency for combined photovoltaic-thermoelectric solar power generation

Solar energy application in a large spectrum has the potential for high-efficiency energy conversion. Though, solar cells can only absorb photon energy of the solar spectrum near their band-gap energy, and the remaining energy will be converted into thermal energy. The use of the thermoelectric generator becomes a necessity for convert this thermal energy dissipated so as to increase efficiency conversion.

This paper analyses the feasibility of photovoltaic-thermoelectric hybrid system and reviews their performance in order to optimize harvested energy. Regarding the thermoelectric effect, a new method of the ambient energy harvesting is presented. This method combines thermoelectric generators and the effects of heat sensitive materials associated to photovoltaic cells in phase change for generating both energy day and night. Experimental measures have been conducted primarily in laboratory conditions for a greater understanding of hybridization phenomena under real conditions and to test the actual performance of devices made. Results show that the hybrid system can generate more power than the simple PV and TEG in environmental conditions. This hybrid technology will highlight the use of renewable energies in the service of the energy production.     

Subcritical water oxidation of propham by H2O2 using response surface methodology (RSM)

This study was conducted to investigate the degradation of propham, which is a compound that pollutes water and seriously threatens human health, by subcritical water oxidation and using H₂O₂ as an oxidising agent. The maximum total organic carbon removal rate of propham was obtained as 73.65% at 40 min of treatment time and 60 mM of H₂O₂ concentration and 373 K of temperature. In addition, response surface method based on the Box-Behnken design was applied to design the degradation experiments of propham for determination of the combined effects of process variables, namely temperature, concentration of oxidising agent and treatment time. The proposed quadratic model of propham degradation, which was examined with the analysis of variance, was used for navigating the design space. The R² and adjusted R² values of the model were determined as 0.9921 and 0.9819 respectively. It was shown that propham was effectively degraded, thus could be removed from the water by using an environmentally friendly method.     

The accounting method and application of CO2 emissions responsibility by the electricity sector at the provincial level in China

When accounting the CO₂ emissions responsibility of the electricity sector at the provincial level in China,it is of great significance to consider the scope of both producers’ and the consumers’ responsibility,since this will promote fairness in defining emission responsibility and enhance cooperation in emission reduction among provinces.This paper proposes a new method for calculating carbon emissions from the power sector at the provincial level based on the shared responsibility principle and taking into account interregional power exchange.This method can not only be used to account the emission responsibility shared by both the electricity production side and the consumption side,but it is also applicable for calculating the corresponding emission responsibility undertaken by those provinces with net electricity outflow and inflow.This method has been used to account for the carbon emissions responsibilities of the power sector at the provincial level in China since 2011.The empirical results indicate that compared with the production-based accounting method,the carbon emissions of major power-generation provinces in China calculated by the shared responsibility accounting method are reduced by at least 10%,but those of other power-consumption provinces are increased by 20% or more.Secondly,based on the principle of shared responsibility accounting,Inner Mongolia has the highest carbon emissions from the power sector while Hainan has the lowest.Thirdly,four provinces,including Inner Mongolia,Shanxi,Hubei and Anhui,have the highest carbon emissions from net electricity outflow- 14 million t in 2011,accounting for 74.42% of total carbon emissions from net electricity outflow in China.Six provinces,including Hebei,Beijing,Guangdong,Liaoning,Shandong,and Jiangsu,have the highest carbon emissions from net electricity inflow- 11 million t in 2011,accounting for 71.44% of total carbon emissions from net electricity inflow in China.Lastly,this paper has estimated the emission factors of electricity consumption at the provincial level,which can avoid repeated calculations when accounting the emission responsibility of power consumption terminals（e.g.construction,automobile manufacturing and other industries）.In addition,these emission factors can also be used to account the emission responsibilities of provincial power grids.     

声凝并联合雾化预处理及其在过滤除尘中的应用

根据声凝并理论和雾化湿式除尘理论,建立了燃煤飞灰在声场联合雾化加湿作为预处理的过滤式除尘实验装置。分别在声场、雾化加湿、声场与雾化加湿相结合3种预处理条件下进行实验,确定合适的加湿量范围,得出不同条件下燃煤飞灰的去除效果。在声场联合雾化加湿条件下,分别研究了声压级和雾化加湿量对飞灰的去除率的影响。结果表明,声场和雾化加湿联合作用能有效提高燃煤PM2.5去除率。以声场联合雾化加湿作为预处理进行过滤除尘实验,结果表明,虽然对高效滤料的除尘效率提高作用有限,但是该预处理可减轻滤袋负荷,有效延缓压差增长,降低清灰频率。由于采用表面覆膜滤材,加湿量控制得当可避免产生"糊袋"现象。     

一种新型铋基光催化剂的合成及其可见光催化性能

采用水热法合成铋基光催化剂Bi4VO8Br,通过X-射线粉末衍射、扫描电镜等手段对其进行表征.选择甲基橙为目标降解物来评价不同条件下合成的Bi4VO8Br在可见光下的光催化活性,发现pH 3、反应时间15 h、反应温度160℃为材料水热合成的最佳条件.考察了Bi4VO8Br在可见光及紫外光下对几种农药和增塑剂的光催化降解性能,显示了Bi4VO8Br对不易光解的含苯环有机物的可见光高活性.五氯酚的光催化过程影响因素优化结果表明,可见光和紫外光分别照射120 min和20 min,其降解率分别达到97％和99％,Bi4VO8Br表面上活性基团的捕获即空穴的氧化作用是主要反应原理.     

废水中甲基橙的电化学降解

以FTO导电玻璃作为阳极、石墨电极作为阴极电解模拟甲基橙废水,优化了工艺条件,并对甲基橙的降解机理进行了初步探究。实验结果表明,在NaCl投加量5 g/L、电压8 V、废水pH 6、初始甲基橙质量浓度6.0 mg/L的优化条件下电解30 min,废水的脱色率达91.3%,COD降低了62%。机理研究结果表明,电解产生的羟基自由基与甲基橙发生氧化还原反应,破坏了甲基橙的显色基团,使其内部某些化学键发生断裂,从而达到脱色的目的。     

某电厂600MW火电机组脱硫增容改造方案探讨

按照国家环保部文件要求，大唐集团河北某电厂600 MW机组湿法脱硫系统需进行增容改造。该电厂根据实际情况，归纳了3种可行的脱硫增容改造方案，即原吸收塔增加喷淋层和高度、双吸收塔串联、双吸收塔双循环，阐述了各自的技术特点，结合性能保证、工程投资、施工周期等影响因素，比较了各方案的优缺点。经过对比和论证，双吸收塔方案比单吸收塔方案更适合于本次工程改造。